Description
Capacity Per Leg:
- 1st Stage – 295 Tons (268 metric tons) to 23’-0”
- 2nd Stage – 190 Tons (172 metric tons) to 31’-9”
- 3rd Stage – 106 Tons (96 metric tons) to 39’-5”
The main features include:
- Foldable boom design for easy transport (fits in standard 20’ container or standard flatbed)
- Three stage double-acting hydraulic cylinders
- Octagonal boom with engineered design
- Self-propelled load spreading crawler track
- Mechanical boom erection and locking system
Each Lifting tower has its’ own self-contained hydraulic power unit with the following characteristics:
- Electric motor : 10HP, (7.5kW) 380-480V 3PH 50-60Hz, 16A
- Power cables : 100+feet
- Wired control cables : 200+feet
- Hydraulic connections : Hard-piped on tower
- Lifting/Lower Speed : 25 ft/hour – Loaded
- Traveling Speed : 55 ft/hour – Loaded
- Control Panel : Lifting/lowering, traveling, side shift & E-stop
The lifting towers can be remotely operated independently or as a group of two, three or four towers via control cable or wirelessly by use of the Intelli-lift remote control characterized by:
- Smart controller capable of controlling up to 4 towers
- Load readout for each cylinder.
- Operating height readout for each cylinder
- Overload alarm
- Synchronized lifting and lowering between all towers
- Synchronized travel between all towers.
- Emergency stop circuit located on remote control.
The Intelli-lift remote control unit uses encrypted bi-directional communication with each of the gantry legs simultaneously to detect and correct un-synchronized motion between the units. By simplifying the operation of the gantry, this system allows the operator the freedom to observe the actual lift rather than worry about controls. Further using the system wirelessly allows the operator to observe the lift from the best vantage point at distances of up to 200 feet (60m) away.
Propelled Side Shift Units:
- Capacity per anchor: 165 Tons (150 metric tons)
- Propulsion is electric powered and operated from the controls of the SBL1100
- A set consists of (4) units
- Max traveling speed: approximately 1ft/min. loaded
- Custom Stands for Shipping Included
(The electronic side shift units allow the gantry to move suspended loads seamlessly from side to side. These propelled side shifting units move transversely with a gear box located on the side of the unit that connects back to the base. This set does NOT contain shackles.
Additional Items included:
- (2) 45’ Engineered Header Beams and (2) 25’ Long W14x311 Header Beams
- (12) 20’, (2) 15’, and (2) 10’ Length Gantry Track Sections
- (1) 4-Point Electric Hookup Panel with Breakers, Cable Storage and Wheeled Stand
- 75 Ton Capacity D-Ring Swivel
- Direct Wire Electrical Pigtail – For Indoor Applications
- KNAACK Storage Box for Miscellaneous Gantry Equipment
- Replacement Wear Pads – (3) sets, Replacement Hydraulic Filters (4)
- Custom Enerpac Road Tarp Kit – All (4) Legs
- Sets Cylinder “Maintenance” Wedges
This 2013 SBL1100 Gantry System comes complete with the following equipment:
Set of (4) Hydraulic Towers, (4) Side-Shift Units, (1) Remote Control, Header Beams, Track Sections, Power & Data Cables and miscellaneous items as listed above. This system is ready to mobilize and comes complete with everything needed to start work immediately.
